-
Synthetic leather cap for protecting and storing the cutting edge of your hobby nippers. Approximate length 60mm, approximate width 35mm.
- $ 4.95
$ 4.95- $ 4.95
- Unit price
- per
-
Metal file with arch shape that cuts well. The arch shape is made to fit into different angles of your plastic model kit. The rounded shape prevents damage from the reverse side of the cutting edge of the file while you sand.
- $ 51.10
$ 51.10- $ 51.10
- Unit price
- per
-
GodHand brings sturdy sanding boards made of stainless steel. Use with adhesive backed sandpaper, or sandpaper with double-sided tape to have a flat sanding plane to sand your models. Each file board is 10mm wide and 2mm thick, ideal for surface preparation in small...
- $ 27.80
$ 27.80- $ 27.80
- Unit price
- per
-
GodHand Kamifude brushes are delicate brushes created by craftsman who specialize in artificial hair brushes. The artificial hair of this brush is made from PBT in Japan. The handle of the brush is wooden. The brush itself is hand manufactured by a Japanese brushmaker....
- $ 19.10
$ 19.10- $ 19.10
- Unit price
- per
-
Highly durable paper file with improved strength and water resistance by soaking "resin" in the paper part. Since it has improved water resistance even compared to normal water resistant paper, it is difficult to tear even if it gets wet with water. Works great...
- $ 5.30
$ 5.30- $ 5.30
- Unit price
- per
-
Double-sided sticky tape from GodHand for use with their sanding boards. Each roll is 15mm wide and 30 meters in length. To use, just attach one side to the sanding board, then cut out the size of sandpaper needed and attach to the opposite...
- $ 25.60
$ 25.60- $ 25.60
- Unit price
- per
-
GodHand's entry level nipper is now available! This highly durable, double-edged nipper is easy for beginners to use. Blade shape and nipper design emphasizes ease of use, moderate sharpness and high durability. As with all nippers from GodHand, it is recommended to make your...
- $ 12.30
$ 12.30- $ 12.30
- Unit price
- per
-
5 piece set of spin blades than when used in a pin vise can make flat-bottom holes in your plastic model kits. Center pin on each spin blade prevents the spin blade from moving once you start spinning. No pilot hole needed! This 5...
- $ 65.60
$ 69.95- $ 65.60
- Unit price
- per
-
Le-Dio pliers are pliers designed to combine the functionality of needle-nose and flat-nose pliers. Leo-Deo bent-nose pliers have a bent tip perfect for detailed work. The holding area of the pliers are engraved to hold small parts firmly. Great for bending tiny parts. There...
- $ 30.60
$ 30.60- $ 30.60
- Unit price
- per
-
A sponge type file that uses highly durable cloth. Unlike a paper file, a cloth file works great for curved surfaces as well as flat surfaces. Printed on the cloth of each file is the grit as well as a color that corresponds with...
- $ 8.80
$ 8.80- $ 8.80
- Unit price
- per
-
A sponge type file that uses highly durable cloth. Unlike a paper file, a cloth file works great for curved surfaces as well as flat surfaces. Printed on the cloth of each file is the grit as well as a color that corresponds with...
- $ 8.20
$ 8.20- $ 8.20
- Unit price
- per
-
The GodHand SPN-120 Ultimate Nipper 5.0 specializes in gate cutting and pursues the "ultimate cut". Because of it's sharpness, it can obtain a smooth cut surface as if the cut had been made by a hobby knife. This cut minimizes whitening of the plastic,...
- $ 59.95
$ 59.95- $ 59.95
- Unit price
- per
-
A sponge type file that uses highly durable cloth. Unlike a paper file, a cloth file works great for curved surfaces as well as flat surfaces. Printed on the cloth of each file is the grit as well as a color that corresponds with...
- $ 9.60
$ 9.60- $ 9.60
- Unit price
- per
-
A sponge type file that uses highly durable cloth. Unlike a paper file, a cloth file works great for curved surfaces as well as flat surfaces. Printed on the cloth of each file is the grit as well as a color that corresponds with...
- $ 8.95
$ 8.95- $ 8.95
- Unit price
- per
-
A sponge type file that uses highly durable cloth. Unlike a paper file, a cloth file works great for curved surfaces as well as flat surfaces. Printed on the cloth of each file is the grit as well as a color that corresponds with...
- $ 8.20
$ 8.20- $ 8.20
- Unit price
- per
-
The GodHand BND-115-N Sharaku Bending Pliers features a diagonal tip to improve work efficiency and comfort. No grooves on the holding section, so you don't have to worry about scratching what your holding. Works fantastic for bending parts. Overall length: Approx. 115 mm.
- $ 23.50
$ 23.50- $ 23.50
- Unit price
- per
-
GodHand Nipper's designed with children in mind! Short grip is designed to be easily held by children. Thicker grip is easier to hold for children. Uses a single-edged design that combines sharpness and durability. Can be used in the same way as Ultimate Nippers...
- $ 45.20
$ 45.20- $ 45.20
- Unit price
- per
-
GodHand "Ubuge" series brushes are delicate brushes created by craftsman who specialize in artificial hair brushes. The "Ubuge" series uses thinner and softer hair, and the brush tip feels fluffy like downy hair. The artificial hair of this brush is made from PBT in...
- $ 21.90
$ 21.90- $ 21.90
- Unit price
- per
-
4 piece set of drill blades than when used in a pin vise can make straight holes in your plastic model kits. Even works on curved model surfaces! This 4 piece set contains 1.0mm, 1.5mm, 2.0mm, and 2.5mm spin blades.
- $ 59.95
$ 65.60- $ 59.95
- Unit price
- per
-
GodHand GH-CPN-120-S Tapered Plastic Nipper Tool.
- $ 44.50
$ 44.50- $ 44.50
- Unit price
- per
SUBSCRIBE TO OUR NEWSLETTER
Get the latest updates on new products and upcoming sales.